50 | FIRE DETECTION SYSTEMS | 2WIRE CONVENTIONAL SYSTEMS t: 0845 884 7000 | f: 0845 884 6000 | w: www.channelsafety.co.uk | @channelsafety | EDITION 7 RANGE OVERVIEW • A powerful C-TEC manufactured, LPCB approved EN54 compliant 2-wire fire alarm panel • Designed to work with Apollo’s AlarmSense range of detectors, call points, sounders and beacons. • Available with 2, 4 and 8 AlarmSense zone circuits • Installer-friendly design accommodates easy first fix and straightforward maintenance • Attractive flush or surface mountable plastic lid and enclosure • Auxiliary remote, fire, fault and reset outputs • ‘Class change’and alert inputs • Four conventional sounder circuits (for use with non-AlarmSense sounders) • Low quiescent current - for extended standby times with small batteries • Intuitive user-friendly interface • Multiple indicators provide a comprehensive overview of system status • System expansion connections for up to eight two-wire repeater panels and a range of Relay Output Cards • Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones • Two on-board relays (Fire and Fault) • Two open-collector outputs (Remote and Reset) PANELS F/CHAS/2 AlarmSense 2-zone fire panel requires 2x B/12V/3.2AH/SLA batteries F/CHAS/4 AlarmSense 4-zone fire panel requires 2x B/12V/3.2AH/SLA batteries F/CHAS/8 AlarmSense 8-zone fire panel requires 2x B/12V/3.2AH/SLA batteries REPEATER PANEL F/CHSC/R AlarmSense 8-zone repeater panel F/CHSC/RDC Repeater driver card S/E20/A Relay card for use with AlarmSense (fitted in panel) BATTERIES B/12V/3.2AH/SLA 12 Volt 3.2Ah sealed lead acid battery (1 block) REMOTE INDICATOR F/CHRI/AS AlarmSense remote indicator (Not for use with sounder base units) CALL POINTS F/CHBG/S/AS/2 AlarmSense surface break glass F/CHBG/AS/COVER Call Point Cover S/BG/TESTKEY/AS Call Point Key APOLLO DETECTORS F/CHHF/A/AS AlarmSense fixed high temperature heat detector complete with base type CS 90˚ F/CHSM/P/AS (55000-396) AlarmSense optical detector complete with base F/CHHR/A/AS (55000-188) AlarmSense 55˚ rate of rise heat detector complete with base APOLLO COMBINATION DETECTORS, SOUNDERS & BEACONS F/CHHF/HT/AS/WB (55000-197) AlarmSense high temp heat detector and sounder base type CS F/CHHR/AS/WB (55000-196) AlarmSense heat detector with sounder base A1R type F/CHHR/AS/WB/BN (55000-198) AlarmSense heat detector with sounder base and beacon A1R type F/CHSM/P/AS/WB (55000-392) AlarmSense optical detector complete sounder base F/CHSM/P/AS/WB/BN (55000-394) AlarmSense optical detector with sounder beacon base APOLLO SOUNDERS & VISUAL INDICATORS F/CHWB/D/AS (45681-510) AlarmSense base sounder F/CHWB/D/BN/AS (45681-509) AlarmSense base mounted electronic sounder/beacon F/CHWB/BN/RD/AS (55000-017) AlarmSense open-area red sounder beacon F/CHWB/RD/AS (55000-018) AlarmSense open area red sounder APOLLO OTHER ACCESSORIES F/CHRM/AS (55000-835) AlarmSense relay module F/CHWB/AS/CAP/RD (45681-295) Red locking cap for AlarmSense base F/CHWB/AS/CAP/WH (45681-294) White locking cap for AlarmSense base SPECIFICATION Construction Polycarbonate enclosure Enclosure Finish RAL7035 Panel Dimensions 380mm (W) x 235mm(H) x 96mm(D) 2, 4 & 8 panels have the same measurements Weight 1.75 Kg (without batteries) Please note batteries are not included: All panels require 2 x B/12V/3.2AH/SLA - listed below AlarmSense- 2 Wire  EN54Third Party Approved