EQUALITY ACT & ASSISTANCE PRODUCTS | INDUCTION LOOP SYSTEMS | 105 t: 0845 884 7000 | f: 0845 884 6000 | w: www.channelsafety.co.uk | @channelsafety | EDITION 7 PRODUCT CODE DESCRIPTION I/CH/AMP Professional handheld microphone for CHIL/200E or CH/APXM plate (requires CH/AXLR lead) I/CH/AMR Levalier radio microphone complete with microphone, receiver, transmitter, PSU. Connects to CHIL/200E or CH/APQM outreach plate I/CH/APM Omni directional plated microphone for wall/ceiling mounting, connects to CHIL/ML1, CHIL/102, CHIL/200E I/CH/AMD Desktop microphone for CHIL/ML1, CHIL/DOM, CHIL/102, CHIL/200E, CHIL/PL1 or CH/APJ outreach plate I/CH/AML Lectern microphone for CHIL/ML1, CHIL/DOM, CHIL/102, CHIL/200E, CHIL/PL1 or CH/APJ outreach plate I/CH/AMR/H Handheld radio microphone c/w mic, receiver, transmitter, psu. Connects to CHIL/200E or CH/APQM outreach plate I/CH/AMT Tie/desk microphone for CHIL/ML1, CHIL/DOM, CHIL/102, CHIL/200E, CHIL/PL1 or CH/APJ outreach plate PRODUCT CODE DESCRIPTION I/CH/APJ 3.5mm mono jack plate for connection of CH/AMT, CH/AMH, CH/AML or CH/AMD microphones I/CH/APL Dual phono line level audio plate for connection of CH/APS SCART lead or other line level audio feeds I/CH/APQM 6.35mm stereo jack plate for connection of CH/AMR/L or H radio mic. I/CH/APQL 6.35mm stereo jack plate for the connection of line level feeds from mixing desks, etc. I/CH/APXM XLR mic level plate for connection of CH/AMP microphone I/CH/APXL XLR line level plate for connection of mixing desk line level feeds I/CH/APM Omni - directional plated microphone for wall/ceiling/desk mounting I/CH/BELDEN/25 25m of Belden 8723 audio cable Outreach Plates Microphones PRODUCT FEATURES Any PDA range amplifier marked with the‘Outreach Compatible’symbol is compatible with our unique Outreach Plate audio input extension system. This system allows the connection of multiple microphone or line level inputs via a range of single gang connector plates. Carefully designed to cover the most common variants of audio connector (including XLR line, XLR mic., 3.5mm jack, dual phono and 1/4”jack), a maximum of 10 outreach plates (any mix) can be daisy chained to an amplifier’s Outreach socket using standard two pair audio cable such as Belden 8723 (or equivalent). Please note: Our I/CHIL/PL1 and I/CHIL/DOM amplifiers do not have outreach sockets and that our I/CHIL/MK1 amplifier can have a maximum of three outreach plates connected to it. PRODUCT FEATURES These microphones have the highest tolerance of magnetic feedback and are therefore recommended for induction loop systems. Dynamic microphones should not be used as they contain moving coil magnets which can be affected by the magnetic field generated by the loop. Phantom power is provided on all Induction Loop amplifiers, so the microphones with internal batteries are not necessary. Please note: All microphones are supplied with a connection lead apart from the I/CH/AMP. If using an AMP, a range of connection leads are available. To avoid interference, microphone cables should be sited at least one metre away from loop cable.