100 | EQUALITY ACT & ASSISTANCE PRODUCTS | TOILET ALARM KITS t: 0845 884 7000 | f: 0845 884 6000 | w: www.channelsafety.co.uk | @channelsafety | EDITION 7 N/HARK+ Stainless steel kit option complete with battery back up and “call acknowledge” feature HARK™ Pull cord units and Push Button Option Available in Stainless steel or white polycarbonate HARK™ Indicator / Sounder units HARK™ Alarm Indicator unit in Stainless Steel finish and Reset unit HARK includes a variety of different accessories to work in compliance for a professional end result. These accessories combine modern aesthetics and high functionality providing you with the ideal solution for the most demanding installations. HARK assists with compliance with the DDA, BS8300 & other care standards. PUSH BUTTON The HARK Push Button can be used instead of a hanging pull cord to notify that the user is in distress. PULL CORD UNITS The pull cord unit is supplied with a red plastic ring. An extra ring is supplied to conform to‘Approved Document M’. The second ring should be fitted lower down near floor level. Activating a call is simply made by pulling the cord. This will activate the re-assurance indicator on the pull cord unit. In turn this will also illuminate the reset unit and trigger the internal sounder. At the same time the Overdoor indicator/ sounder unit will illuminate and trigger it’s own internal sounder. RESET UNITS The reset unit has a blue engraved legend‘RESET’. When a call is activated the reset switch illuminates and the internal sounder activates. The call is reset by simply pressing the reset switch. The reset switch is supplied with Braille legend on the switch piece. INDICATOR / SOUNDER UNITS The Overdoor indicator/Sounder unit is supplied with an integral Power supply unit. A fused spur should be fitted nearby and wired to this unit to provide power. The unit will illuminate and sound as soon as a call is activated. The unit will cease once the reset switch is pressed. Anti-Vandal Protective Cages HARK™ PRODUCT FEATURES The Hark Help and Assistance Response Kit is simple to install and provides peace of mind wherever an indication of‘assistance required’is called for. Meeting the BS Standard requirement for all disabled toilets to be fitted with an emergency toilet alarm. Available in kit solutions finished in white or stainless steel, to fit discreetly into any decor or environment. The unit benefits from a reassuring audible sound from within the reset unit which confirms that assistance is on the way in addition the unit has braille text. • Only 3 points to install on a standard system, and can be simply linked and expanded to other systems • Simple to expand as requirements increase • Sounder within the reset unit to give audible reassurance that as- sistance is on the way • Kits supplied with Twin pull cord rings, Braille text on the reset unit as well as a Disabled Persons sticker • Multi-way remote indicator units available • Assists in compliance with the DDA, BS8300 & other care standards • Suitable for commercial and public buildings as well as specialist areas such as hospitals, restaurants, nursing and retirement homes. • Call acknowledge on Hark+ ADDITIONAL OPTIONS The Help Alarm Response Kit can be linked to a remote multi-way indicator panel (for use in a reception or staffed area). A 12 volt relay unit can be used to interface the unit to a wide range of equipment such as. • BMS • Fire alarms • Intruder Alarms • Paging transmitters Additional pull cord units can be added to the system to allow for larger rooms or multi area coverage. Please note that additional pull cords will operate and be reset by the same unit as the initial pull cord. ALARM INDICATOR UNITS The Indicator Units are simple to install and meet the BS requirement for all disabled toilets to be fitted with an emergency toilet alarm. 75 db at 1metre These units can be purchased as either 1 or up to 11 indicators and come finished in either White Polycarbonate or Stainless Steel. Custom engraving is available.