52 | FIRE DETECTION SYSTEMS | 2WIRE CONVENTIONAL SYSTEMS t: 0845 884 7000 | f: 0845 884 6000 | w: www.channelsafety.co.uk | @channelsafety | EDITION 7 PRODUCT FEATURES • Complies to BS5839 and EN54 part 4 • 32 devices per zone • Output module available for plant shutdown or door release • Panels are supplied without battery - options are listed • 4 line x 20 character LCD display • Ability to differentiate between callpoint or detector alarms • Checkpoint alarm verification procedure • Highlighted selection menu • Event log storing up to 500 events • 3 enhanced test modes • Allows detectors & sounders to be installed on the same pair of wires • Built-in EOL capability in all devices • Use of Multipoint detector offers 7 modes of detection • No extra devices needed for audible warning • Self-calibrates every 6 hours • Continuously monitors for dust contamination Sabre Pro- 2 Wire  EN54Third Party Approved KITS F/CHSA/2/PRO/KIT Sabre Pro 2 zone fire alarm kit c/w 2 call points, 6 optical smoke/heat sounders & 1 head removal tool F/CHSA/4/PRO/KIT Sabre Pro 4 zone fire alarm kit c/w 2 call points, 6 optical smoke/heat sounders & 1 head removal tool F/CHSA/8/PRO/KIT Sabre Pro 8 zone fire alarm kit c/w 2 call points, 6 optical smoke/heat sounders & 1 head removal tool PANELS F/CHSA/2/PRO Sabre Pro 2 zone dual wire fire alarm panel (requires 2 x B/12V/3.2AH/SLA batteries) F/CHSA/4/PRO Sabre Pro 4 zone dual wire fire alarm panel (requires 2 x B/12V/3.2AH/SLA batteries) F/CHSA/8/PRO Sabre Pro 8 zone dual wire fire alarm panel (requires 2 x B/12V/3.2AH/SLA batteries) F/CHSA/PRO/R Sabre Pro repeater panel for 4 and 8 Zone Panels Only REMOTE INDICATOR F/CHRI/60 Remote indicator BATTERIES B/12V/3.2AH/SLA 12 Volt 3.2Ah sealed lead acid battery (1 block) DETECTORS F/CHBN/SU/SA Sabre sounder/strobe wired on zone F/CHSU/I/SA Sabre industrial horn sounder 90dBA IP55 F/CHSA/SH/PRO Sabre combined optical smoke/heat detector F/CHSA/SHS/PRO Sabre combined optical smoke/heat detector and sounder F/CHSA/SHSB/PRO Sabre combined optical smoke/heat detector and sounder/beacon SOUNDERS & VISUAL INDICATORS F/CHSU/SA Sabre red electronic sounder unit CALL POINTS F/CHBG/S/SA Sabre series break glass call point F/CHBG/S/SA/WP Sabre series IP65 break glass call point F/CHBG/COVER/SA Call Point Cover S/BG/TESTKEY/SA Call Point Key INPUT / OUTPUT MODULES F/CHSW1/SA Sabre Input / Output module OTHER ACCESSORIES F/CHHRT/SA/PRO Sabre head removal tool SPECIFICATIONS Construction 5VB rated ABS Battery Charger 170 mA current limiter Battery (reverse polarity) 3.2AH F 20mm (in line with battery leads) Glass Panel Dimensions Fascia 331mm2 - Back box 305mm - Depth 99mm Weight (excluding batteries) 2 Zone - 2.25 Kg 4 Zone - 2.28 Kg 8 Zone - 2.36 Kg Please note batteries are not included, all panels require 2x B/12V/3.2AH/SLA to operate, listed below