Rapidfire – Wireless Interface

Product Code: F/CHRP/WI

Easy Optical Wireless Battery Operated
Installation  Device Compatibility  System

The wireless Rapidfire system from Channel has been designed for site protection for temporary buildings and as such is suitable for a wide range of applications, for example:- Sheds/outhouses, Porta-cabins, Caravan parks and Building sites.

The Rapidfire Wireless Site Alarm Interface module allows you to connect Rapidfire wireless devices to a wired fire alarm system. This may be required if an existing alarm system needs to be cost effectively expanded or a new system needs fire detection in an area where it is impractical or impossible to wire in devices.

Email this product to a friend
Like on Facebook
Share this product on Twitter


  • Enables rapid installation
  • Quick and simple to install, with no mains supply required
  • This battery operated system communicates to all the devices via
    its wireless network
  • Completely wireless system can support up to 10 devices


  • Dimensions: 83mm (H) 83mm (W) 46mm (D)
  • Up to 100m range in open area conditions
  • 12V Power connection required
  • Unlimited connection capacity
  • Power External 12 V
  • Voltage range 9 to 28 V min V max
  • Breaking 1A at 30VDC
  • Operating Temperature – 10 ° C to + 50 ° C
  • Standby Power Consumption 0.1 mA at 12V
  • Consumption in alarm 25 mA at 12 V
  • IP Rating IP42
  • Weight 0.20Kg