Firewatch Panels – FW9003

Product Code: F/FW9003/

Addressable EN54 10 & 20Kg Not Included
System  Approval Weights  Batteries

The Firewatch 9003 range has been designed to assist with the normal operation of a fire detection system. Standard weekly testing is available through a simple menu structure allowing selection of the zones to be
tested either with or without activation of the output relays or sounders. Additionally, the status of individual devices can be analysed to determine whether cleaning or replacement is required. As the installation grows the
panels can expand with the building or site by adding additional devices, loop cards, printers or repeater panels. Additionally, further panels can be networked together allowing an even bigger system to be created. Remote (or local) printers can easily be connected to provide a paper copy of events as and when they occur or provide a historical record.

  • Compatible protocols: Apollo XP95/Discovery, Hochiki’s ESP & Nittan
  • Simple, robust design to EN54 Parts 2 & 4
  • 4×40 — Character LCD alphanumeric display with back-light
  • Up to 200 zone LEDs
  • Up to 10 individual level 2 user access codes
  • Optional lockable glass door — provides added security / protection
  • Provide up to 72hr stand-by (subject to verification)
  • Walk test facility
  • Event logic — facilitates complex cross-panel programming
  • Auto-learn facility allows rapid and accurate commissioning of devices
  • Windows™ configuration tool allows off -site programming
  • Facility to print history and event logs
  • Shared Zone System – Each networked control panel shares information
  • Report & Control System – For multiple building sites where information is presented at the local and master panels only
  • A compliant fault tolerant network can be created using the additional, optional Hi-485 network card
  • 99 panel network allows systems in excess of 60,000 devices to be managed

  • F/FW9003/1SE | 1 loop fire panel less loop cards (requires 2 x B/12V/7AH/SLA batteries)
  • F/FW9003/2SE | 2 loop fire panel less loop cards (requires 2 x B/12V/7AH/SLA batteries)
  • F/FW9003/5SE | 5 loop fire panel less loop cards 20 zones — expandable up to 80 (requires 2 x B/12V/12AH/SLA batteries)


  • F/FW9003/485 | RS485 communication module
  • F/FW9003/HI485 | Hi485 network card — required to comply with BS5839
  • F/LC9003 | Apollo Loop card for use with FW9003/5SE and 2SE panel
  • F/LC9003/HOC | Hochiki Loop Card
  • F/LC9003/NIT | Nittan Loop Card


  • F/FW9000/R | Repeater panel — no controls
  • F/FW9000/RC | Repeater panel — with controls


  • B/12V/7AH/SLA  |12 Volt 7Ah sealed lead acid battery (1 block)
  • B/12V/12AH/SLA | 12 Volt 12Ah sealed lead acid battery (1 block)
The Firewatch FW9003 Fire Alarm Panels are compatible with the following protocol:-