Sabre Pro Fire Alarm Panel

Product Code: F/CHSA/

2 Wire EN54 2.25Kg / 2.28Kg / 2.36Kg Not Included
System  Approval Weight  Batteries

Using the multipoint detector with sounder as part of the Sabre Pro 2-wire fire alarm system means that when a detector is wired in, a sounder is also, with no extra wiring required. The repeater panel is connected directly to the fire alarm panel (4 or 8 zone only) and reports events which occur on the fire alarm panel.

It can also perform system controls over the network (i.e. Silence Alarms, Reset, Sound Alarms & Silence Buzzer) A Maximum of 8 repeater panels can be connected to a single control panel. 

Email this product to a friend
Like on Facebook
Share this product on Twitter
  • Key or code access for control of user functions
  •  LCD screen with zonal identifi cation text
  • 500 Event log & Up to 72 hour Standby
  • Break glass identification on panel to differentiate between call point or detector alarm
  • 2 auxiliary sounder circuits
  •  “Alarm confirmation” Pre alarm facility
  • Control panel warning for head contamination indication on panel display to signal that optical chamber is contaminated
  • Complies to BS5839 and EN54 part 4
  • Multi-function walk test facility
  • A wide range of input and output functions to make system interfacing simple
  • Dual purpose flush or surface housing

PLEASE NOTE: Sabre Pro Fire Panels and Kits have been specifically designed for use with Sabre Pro Devices. For compatible Devices — please see Sabre Pro Devices.

KITS

  • F/CHSA/2/PRO/KIT | Sabre Pro 2 zone fire alarm kit c/w 2 call points, 6 optical smoke/heat sounders, 1 smoke/heat sounder, strobe & 1 head removal tool
  • F/CHSA/4/PRO/KIT | Sabre Pro 4 zone fire alarm kit c/w 2 call points, 6 optical smoke/heat sounders, 1 smoke/heat sounder, strobe & 1 head removal tool
  • F/CHSA/8/PRO/KIT | Sabre Pro 8 zone fire alarm kit c/w 2 call points, 6 optical smoke/heat sounders, 1 smoke/heat sounder, strobe & 1 head removal tool

PANELS

  • F/CHSA/2/PRO | Sabre Pro 2 zone dual wire fire alarm panel (requires 2 x B/12V/3.2AH/SLA batteries)
  • F/CHSA/4/PRO | Sabre Pro 4 zone dual wire fire alarm panel (requires 2 x B/12V/3.2AH/SLA batteries)
  • F/CHSA/8/PRO | Sabre Pro 8 zone dual wire fire alarm panel (requires 2 x B/12V/3.2AH/SLA batteries)
  • F/CHSA/PRO/R | Sabre Pro repeater panel

REMOTE INDICATOR

  • F/CHRI/60 | Remote indicator

BATTERIES

  • B/12V/3.2AH/SLA | 12 Volt 3.2Ah sealed lead acid battery (1 block)