LED Exit Sign – Vale
Product Code: E/CHVL/M3/L/

Lightbulb Wattage IP
LED 4.2W 25m IP20
Light Source  Wattage Viewing Distance  IP Rating

The Vale LED Exit Sign utilises LED technology with the added advantage of ‘self-test’ operation. The Vale  LED Exit Sign is designed to be fully recessed; available in several finishes allowing the unit to meet with the end users decorative requirements.

Vale is supplied as standard with a 7mm blade which ensures the required even distribution of light throughout it’s surface.

  • Self-test operation as standard to BS EN 62034
  • Low running costs ( 4.2 W)
  • 24 x 0.2W LEDs
  • Long life LED technology
  • Maintained or non-maintained 3 hour emergency backup (can be switched to non-maintained if required)
  • Double sided legend, supplied as standard with arrow up
  • Housings available in white, brass or chrome
  • Incorporates 2.4 NiMH 4.8V 800mAh battery
  • Minimal maintenance required
  • Additional pictograms available to fit in with your existing scheme
  • Meets BS EN 60598-2-22 and other relevant standards
  • E/CHVL/M3/L/WHST | Vale LED 3 hour maintained white self-test complete with legend arrow up
  • E/CHVL/M3/L/CHST | Vale LED 3 hour maintained chrome self-test complete with legend arrow up
  • E/CHVL/M3/L/BRST | Vale LED 3 hour maintained brass self-test complete with legend arrow up
  • S/LEG/VL/AD | Vale double sided pictograms arrow down legend (insert only)
  • S/LEG/VL/ALR | Vale double sided arrow pictograms left/right (insert only)
  • S/LEG/VL/AU | Vale legend arrow up insert pictograms only (insert only)


  • B/BATT/VALE Battery for Vale (Pre – 2016 models)
  • B/BATT/DA/FO/VL/NIHM Battery for Vale (2016 onwards)